Application and Configuration:
Belt-end sampling system refers to the system in which a primary sampler is mounted at the end of belt conveyor and collects samples from material flow at the end of belt conveyor.
This picture shows a typical belt-end sampling system that consists of belt-end mounted primary sampler in rotary or reciprocal type, sample feeder, crusher, divider and sample collector.
Operation Procedure:
This system is able to realize the timed and quantified sampling control through the operation process below:
Sample is taken from material flow falling from the end of conveyor and enters the sample feeder through chutes. And then, the feeder sends it to crusher continually and evenly, in which it is crusher according to the required granularity. The crushed sample is then divided in the secondary sampler for the second time. The final sample enters the collector and the remaining material in the system comes back to the material stream.
Features and Advantages:
1. PLC control is incorporated for high degree of automation and reliable operation.
2. Compact system design saves installation space and is suitable for low space installation.
3. The residual material goes down the conveying tube by pull of gravity, hence no need for special equipment for remaining material handling.
4. Elaborate system design and component/material selection ensures block-free and spill-free operation.
Typical Users
Baosteel Group Co.,
Jingtang Iron and Steels under Shougang Group Co.,
Guangzhou Port Group,
Hangzhou Iron and Steels,
Panzhihua Iron and Steels Group,
Shagang Group,
Wuhu Power Plant,
Shaoguan Power Plant,
Shenneng Holdings
Yunwei Group.